PD-CH7
PD1800 / CH7 / D-5 / S-50 / SC-65The Acebil PD1800 Pro Pedestal with CH7 Head / D-5 Dolly / and Carry Case is a complete high performance pedestal, head, and dolly system that sets up with ease in minutes. Just unfold the pedestal legs onto the dolly, attach the head atop, and you're ready to go. The head features a 100mm ball mount and a sliding camera plate, and it supports a payload of 18kg / 39.6lb.
The Acebil PD1800 Pro Pedestal with CH7 Head / D-5 Dolly / and Carry Case is a complete high performance pedestal, head, and dolly system that sets up with ease in minutes. Just unfold the pedestal legs onto the dolly, attach the head atop, and you're ready to go. The head features a 100mm ball mount and a sliding camera plate, and it supports a payload of 18kg / 39.6lb. The pedestal is built with a fixed air pressure column tightly sealed for consistent reliability and with a column lock knob on the middle spreader to provide you with secure stabilization for extensive shooting. The head comes equipped with an 8 step counter balance system and with pan and tilt drag functions that employ a simple 0 + 6 step change system for selecting torque. Extendable pan bars and rubber grips help perform smooth and precise camera movements, and an illuminated LED leveling bubble allows for efficient camera set-ups.
- 100mm ball
- Fixed Air Pressure Column
- Supports loads up to 18kg / 39.6lb
- Equipped with an 8 step counter balance system
CH7 HEAD | |
---|---|
Payload | 18kg / 39.6lb |
CB Payload | 4~15kg / 8.8~33.0lb |
Counter Balance | 8 Steps |
Pan Drag | 0+6 Steps |
Tilt Drag | 0+6 Steps | Tilt Angle | +90° / -70° |
LED Bubble Level Illumination | Yes |
Camera Plate | Slide Plate |
Plate Attachment | 3/8" Screw |
Spare Camera Screw | 1/4" & 3/8" screw | Slide Range | +50 / -50 mm |
Ball Diameter | 100mm |
PD1800 PEDESTAL | |
Payload | 15kg / 33lb |
Weight | 7.4kg / 16.3lb |
Height | 87-164cm / 34.3”-64.6” |
D-5 DOLLY | |
Payload | 90kg / 200lb |
Weight | 5.3kg / 11.7lb |
Wheel Diameter | 125mm |